Excellent quality will create new heights forever.
13506144009
0519-88909038
Popular keyword search:Sludge dryer  ,  Pharmaceutical GMP Oven

Contact Us

Changzhou Luyao Drying Equipment Co.,Ltd.
Address:Three Hekou Industrial Zone, Zhenglu Town, Changzhou
Contacter:Mr Fang
Phone:13506144009
Tel:0519-88909038
Fax:0519-88909038
Website:www.luyaodry.com
Email:fangqun1968@163.com
Zip code:213115
Current Location:首页 > Products > Drying equipment series

Drying equipment series

SZG series double cone rotary vacuum dryer

Profile:Double Cone Rotary Vacuum Dryer is the introduction of thermal energy (such as hot water, low-pressure steam or heat transfer oil) in the closed interlayer, and heat is transferred to the dried material through the inner shell. The material is in a vacuum state, and the vapor pressure drops to make the water (solvent) on the surface of the material reach saturation and evaporate. The vacuum pump discharges the material in time. The moisture (solvent) inside the material continuously penetrates into the surface, evaporates and discharges into three processes...

Detailed Description

Product Overview
   SZG double cone vacuum dryer is combined with our factory in domestic similar product technology developed by a new generation drying device, Cone Vacuum using a belt - chain two elastic coupling mode, thus smooth operation. The specially designed process fully embodies the good concentricity of the two shafts. The heat medium and the vacuum system all use reliable mechanical seals or American technology rotary joints. On this basis, we have developed SZG-A which can not only stepless speed regulation but also thermostatic control.


     As a professional drying equipment manufacturer, our products range from high-temperature thermal oils to thermal media, medium-temperature steam, and low-temperature hot water. When drying the viscous material, we will specially design the "copy board" mechanism or set the ball in the tank.

 

Working principle 
 ◎ In the sealed interlayer, heat energy (such as hot water, low-pressure steam or heat-conducting oil) is introduced, and heat is transferred to the dried material through the inner shell. 
 ◎ Under the drive of the power, the tank is rotated slowly and the materials in the tank are continuously mixed to achieve the purpose of strengthening and drying. 
 ◎ The material is in a vacuum state, and the vapor pressure drops to make the water (solvent) on the surface of the material reach saturation and evaporate, and it is discharged and recovered by the vacuum pump in time. The process of continuous infiltration, evaporation, and discharge of water (solvent) inside the material is continuously carried out and the material is dried in a short time.


   Suitable materials
      for the chemical, pharmaceutical, food and other industries of powder, granular and fiber concentration, mixing, drying and low-temperature drying materials (such as biochemical products, etc.). It is more suitable for the drying of materials that are easy to oxidize, volatile, heat-sensitive, intensely stimulating, toxic materials and materials that are not allowed to destroy crystals.

 

Installation demonstration

Double Cone Rotary Vacuum Dryer Installation Demonstration
   Performance characteristics
 ◎ oil heating. Using automatic temperature control. Can be dried biochemical products 
 ◎ and mineral raw materials, the temperature can be between 20 ~ 160 o C. 
 ◎ High thermal efficiency, more than 2 times higher than normal oven. 
 ◎ Indirect heating. The material will not be contaminated and meet the "GMP" requirements. Equipment maintenance is simple and easy to clean. 
 ◎ Recommended process placement demonstration solvent recovery process placement.


   Schematic


   Technical specifications

Name/Specifications1003505007501,000
Tank volume1003505007501,000
Loading capacity (L)≤50≤175≤250≤375≤500
Heating area (m2)1.1622.633.54.61
Speed (rpm)4 - 6
Motor power (kw)0.751.11.523
Coverage length × width (mm)2160×8002260×8002350×8002560×10002860×1300
Rotary height (mm)17502100225024902800

Tank design pressure (Mpa)

-0.1-0.15
Jacket design pressure (Mpa)≤ 0.3
Operating temperature ( o C)Tank ≤85 Jacket ≤140
When using a condenser, a vacuum pump,2X-15A2X-15A2X-30A2X-30A2X-70A
Model, power2KW2KW3KW3KW505KW
When not using a condenser, vacuum pump,SK-0.4SK-0.8SK-0.8SK-2.7BSK-2.7B
Model, power1.5KW2.2KW2.2KW4KW4KW
Weight (kg)8001100120015002800

 

Name/Specifications15002000350045005000
Tank volume15002000350045005000
Loading capacity (L)≤750≤1000≤1750≤2250≤2500
Heating area (m2)5.587.511.213.114.1
Speed (rpm)4 - 6
Motor power (kw)345.57.511
Coverage length × width (mm)3060×13003260×14003760×18003960×20004400×2500
Rotary height (mm)29402990349041004200

Tank design pressure (Mpa)

-0.1-0.15
Jacket design pressure (Mpa)≤ 0.3
Operating temperature ( o C)-0.1-0.15
When using a condenser, a vacuum pump,JZJX300-8JZJX300-4JZJX600-8JZJX600-4JZJX300-4
Model, power7KW9.5KW11KW20.5KW22KW
When not using a condenser, vacuum pump,SK-3SK-6SK-6SK-9SK-10
Model, power5.5KW11KW11KW15KW18.5KW
Weight (kg)33003600640075008600

Note: For materials with large volume changes before and after drying, the loading factor can be increased or decreased appropriately.


Prev:ZPG vacuum rake dryer

Next:ZLG series vibration fluidized bed dryer

Copyright:Changzhou Luyao Drying Equipment Co.,Ltd.
Address:Three Hekou Industrial Zone, Zhenglu Town, Changzhou    Contacter:Mr Fang     Mobile:13506144009
Tel:0519-88909038    Fax:0519-88909038
SiteUrl:www.luyaodry.com    Email:fangqun1968@163.com    Zip code:213115